|
ISPM 15 Heat Treatment Services:
Illinois Industrial Lumber is your ISPM 15Compliance EXPERT,and is a licensee with Timber Products Inspection Bureau. We inventory over 5 million board feet of Heat Treated (HT) softwood and hardwood lumber; and cut to size and re-stamp with the appropriate IPPC and HT stamps.
 HT STAMP
USE: Identifies individual pieces of lumber or lumber components as being heat-treated.
APPLICATION: Mark must be applied legibly a minimum of one time per individual piece. 100% of the merchantable unit should be marked. ( A special provision is made for “small” pieces).
TYPICAL USERS: Lumber manufacturers, lumber remanufacturers. |
|
 IPPC STAMP
USE: Identifies assembled wood packaging material (pallets, boxes, crates, etc.) as being heat-treated and in compliance with ISPM 15.
APPLICATION: Mark must be applied legibly a minimum of two times on opposite faces.
TYPICAL USERS: Wood packaging manufacturers. |
|
 IPPC DUNNAGE STAMP
USE: Identifies wood dunnage (blocking, bracing, chocking, etc.) as being heat-treated and in compliance with ISPM 15.
APPLICATION: Mark must be applied legibly every 24 inches for material being supplied to another facility. Material used in internal loading applications only requires one legible mark per piece.
TYPICAL USERS: Wood packaging manufacturers, shippers, freight consolidators. |
| It is imperative that the appropriate mark be used as specified by the type of product and its application. Questions regarding these marks should be directed to your TP field representative or the TP office. |
|
|
TIMBER PRODUCTS INSPECTION
WEST COAST OFFICE
VANCOUVER, WA
(360) 449-3138 PHONE
(360) 449-3953 FAX
cdean@tpinspection.com |
|
|
